Subaru Legacy 2003 Service Manual page 2483

MANUAL TRANSMISSION AND DIFFERENTIAL
6. Switches and Harness
A: REMOVAL
1. BACK-UP LIGHT AND NEUTRAL POSI-
TION SWITCH
1) Disconnect connector battery ground cable.
2) Remove air intake duct and cleaner case. (Non-
TURBO model)
<Ref. to IN(H4SO)-6, REMOVAL, Air Cleaner
Case.> and <Ref. to IN(H4SO)-7, REMOVAL, Air
Intake Duct.>
3) Remove the intercooler (TURBO model)
<Ref. to IN(H4DOSTC)-13, REMOVAL, Intercool-
er.>
4) Disconnect connector back-up light switch and
neutral position switch.
Non-TURBO model
( B )
(A) Neutral switch (Brown)
(B) Back-up light switch (Gray)
TURBO model
5) Lift-up the vehicle.
SWITCHES AND HARNESS
( A )
MT-00104
MT-00105
MT-42
6) Remove back-up light switch and neutral posi-
tion switch with harness.
( B )
(A) Neutral switch (Brown connector)
(B) Back-up light switch (Gray connector)
2. HIGH-LOW SWITCH
1) Disconnect connector battery ground cable.
2) Remove air intake duct and cleaner case.
<Ref. to IN(H4SO)-6, REMOVAL, Air Cleaner
Case.> and <Ref. to IN(H4SO)-7, REMOVAL, Air
Intake Duct.>
3) Disconnect connector high-low switch.
( A )
( B )
( C )
(A) Neutral switch (Brown)
(B) Back-up light switch (Gray)
(C) High-low switch (Black)
4) Remove HI-LO switch cable from clamp.
5) Remove HI-LO switch.
(B)
(A) Clamp
(B) High-low switch
( A )
MT-00106
MT-00107
(A)
MT-00108