Subaru Legacy 2003 Service Manual page 2530

4) Straighten lock nut at staked portion. Remove
the lock nut using ST1 and ST2.
ST1 499987300 SOCKET WRENCH (50)
ST2 899884100 HOLDER
ST2 ST1
5) Remove 5th driven gear using ST.
ST 499857000 5TH DRIVEN GEAR REMOV-
ER
ST
6) Remove woodruff key.
7) Remove roller bearing, 3rd-4th driven gear using
ST1 and ST2.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
8) Remove the key.
DRIVE PINION SHAFT ASSEMBLY
MT-00247
MT-00248
ST1
ST2
MT-00249
MT-89
MANUAL TRANSMISSION AND DIFFERENTIAL
9) Remove 2nd driven gear, inner baulk ring, syn-
chro cone and outer baulk ring.
(A) 2nd driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
10) Remove 1st driven gear, 2nd gear bushing,
gear and hub using ST1 and ST2.
NOTE:
Replace gear and hub if necessary. Do not attempt
to disassemble if at all possible because they must
engage at a specified point. If they have to be dis-
assembled, mark the engaging point beforehand.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
11) Remove sub gear for 1st driven gear.
( D ) ( A )
( C ) ( B )
MT-00250
ST1
ST2
MT-00251