Subaru Legacy 2003 Service Manual page 2188

19.ATF Filter
A: REMOVAL
1. EXCEPT 3.0 L MODEL
NOTE:
The ATF filter is maintenance free.
1) Lift-up the vehicle.
2) Using ST, remove ATF filter.
ST 498545400 OIL FILTER WRENCH
(A) ATF filter
2. 3.0 L MODEL
• ATF Filter
NOTE:
The ATF filter is maintenance free.
1) Lift-up the vehicle.
2) Remove front left mud guard.
<Ref. to EI-22, REMOVAL, Mud Guard.>
3) Using ST, remove ATF filter.
ST 498545400 OIL FILTER WRENCH
• ATF Filter Assembly
1) Remove battery.
2) Lift-up the vehicle.
3) Remove front left mud guard.
<Ref. to EI-22, REMOVAL, Mud Guard.>
4) Lower the vehicle.
5) Release clamp of IN, OUT of oil filter hose, and
remove hose from pipe.
NOTE:
• Plug the pipe.
ATF FILTER
( A )
ST
AT-00091
AT-00700
• Put a mark etc., to distinguish IN, OUT on pipe
and hose.
6) Remove oil filter bracket installation nut.
7) Remove ATF filter assembly.
8) Remove ATF filter with attachment to bracket.
9) Get new ATF filter and apply a thin coat of ATF
to the oil seal.
3. TURBO MODEL
NOTE:
The ATF filter is maintenance free.
1) Set the vehicle on lift.
2) Remove the battery.
3) Remove oil filter bracket mounting bolts.
AT-73
AUTOMATIC TRANSMISSION
AT-00701
AT-00702
AT-00906