Subaru Legacy 2003 Service Manual page 1753

EXHAUST
5. Rear Exhaust Pipe
A: REMOVAL
1) Lift-up the vehicle.
2) Separate the rear exhaust pipe from center ex-
haust pipe.
CAUTION:
Be careful, the exhaust pipe is hot.
3) Separate the rear exhaust pipe from muffler.
CAUTION:
Be careful not to pull down the rear exhaust
pipe.
4) Remove the rear exhaust pipe.
B: INSTALLATION
NOTE:
Replace the gaskets with new ones.
1) Install the rear exhaust pipe to muffler.
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
REAR EXHAUST PIPE
2) Install the rear exhaust pipe to center exhaust
pipe.
Tightening torque:
3) Lower the vehicle.
C: INSPECTION
EX-00085
1) Make sure there are no exhaust leaks from con-
nections and welds.
2) Make sure there are no holes or rusting.
3) Make sure the cushion rubber is not worn or
cracked.
EX-00090
EX-00090
EX(H4DOSTC)-12
18 N·m (1.8 kgf-m, 13.0 ft-lb)
EX-00085