Subaru Legacy 2003 Service Manual page 1821

Hide thumbs Also See for Legacy 2003:
Table of Contents

Advertisement

IGNITION COIL AND IGNITOR ASSEMBLY
IGNITION
3. Ignition Coil and Ignitor As-
sembly
A: REMOVAL
Direct ignition type has been adopted.
Refer to the "Spark Plug Removal" for removal pro-
cedure. <Ref. to IG(H4DOSTC)-5, REMOVAL,
Spark Plug.>
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
16 N·m (1.6 kgf-m, 11.7 ft-lb)
C: INSPECTION
Ignitor is integrated with the coil. Therefore resis-
tance cannot be measured.
For inspection procedure of ignition system, refer to
the following.
<Ref. to EN(H4DOSTC)-144, DTC P0350 — IGNI-
TION COIL PRIMARY/SECONDARY CIRCUIT —,
Diagnostic Procedure with Diagnostic Trouble
Code (DTC).>
IG(H4DOSTC)-8

Advertisement

Table of Contents
loading

Table of Contents