Subaru Legacy 2003 Service Manual page 2263

AUTOMATIC TRANSMISSION
13) Install thrust needle bearing in the correct di-
rection.
( B )
(A) Hight clutch hub
(B) Thrust needle bearing
(C) Upside
(D) Downside
(E) Outside
14) Install the high clutch assembly. <Ref. to AT-
131, INSTALLATION, High Clutch and Reverse
Clutch.>
15) Install oil pump housing to transmission case.
<Ref. to AT-113, INSTALLATION, Oil Pump.>
16) Install the control valve body and oil pan. <Ref.
to AT-61, INSTALLATION, Control Valve Body.>
17) Install the torque converter clutch case assem-
bly to the transmission case assembly. <Ref. to AT-
110, INSTALLATION, Torque Converter Clutch
Case.>
18) Install the reduction driven gear. <Ref. to AT-
102, INSTALLATION, Reduction Driven Gear.>
19) Install the reduction drive gear. (MPT model)
<Ref. to AT-104, INSTALLATION, Reduction Drive
Gear.>
20) Install the center differential carrier. (VTD mod-
el) <Ref. to AT-106, INSTALLATION, Center Differ-
ential Carrier.>
21) Insert inhibitor switch and transmission con-
nector into stay.
22) Install air breather hose. <Ref. to AT-83, IN-
STALLATION, Air Breather Hose.>
23) Install the oil cooler pipes. <Ref. to AT-80, IN-
STALLATION, ATF Cooler Pipe and Hose.>
24) Install the oil charger pipe with O-ring. <Ref. to
AT-84, INSTALLATION, Oil Charger Pipe.>
25) Insert the input shaft while turning lightly by
hand.
2-4 BRAKE
Normal protrusion A:
( C )
( E )
( D )
( A )
AT-00234
26) Install the torque converter clutch assembly.
<Ref. to AT-85, INSTALLATION, Torque Converter
Clutch Assembly.>
27) Install the transmission assembly to the vehi-
cle. <Ref. to AT-42, INSTALLATION, Automatic
Transmission Assembly.>
AT-148
50 — 55 mm (1.97 — 2.17 in)
A
AT-00291