Subaru Legacy 2003 Service Manual page 2599

FRONT SUSPENSION
1. General Description
A: SPECIFICATIONS
Model
Camber (Tolerance: ±0°30')
Caster
Toe-in
Kingpin angle
Front
Wheel arch height
[Tolerance: +12/−24 mm
(+0.47/−0.94 in)]
Diameter of stabilizer
Camber (Tolerance: ±0°45')
Toe-in
Thrust angle
Wheel arch height
Rear
[Tolerance: +12/−24 mm
(+0.47/−0.94 in)]
Diameter of stabilizer
NOTE:
• Front and rear toe-in and front camber can be
adjusted. If toe-in or camber tolerance exceeds
specifications, adjust toe-in and camber to the mid-
dle value of specification.
• The other items indicated in the specification ta-
ble cannot be adjusted. If the other items exceed
specifications, check suspension parts and con-
GENERAL DESCRIPTION
Sedan
2.0 L 2.5 L 2.0 L
−0°05'
3°05'
0±3 mm (0±0.12 in) Each toe angle: ±0°15'
14°15'
388 mm
(15.28 in)
19 mm 21 mm 19 mm
(0.75 in) (0.83 in) (0.75 in)
−0°30'
0±3 mm (0±0.12 in) Each toe angle: ±0°15'
371 mm
(14.61 in)
14 mm 15 mm
(0.55 in) (0.59 in)
FS-2
Wagon OUTBACK
2.5 L Except
Australia
−0°05'
0°25'
2°50' 2°40'
14°15' 13°30'
388 mm 428 mm
(15.28 in) (16.85 in)
21 mm 21 mm
(0.83 in) (0.83 in)
−0°20' −0°10'
0°±30'
381 mm 421 mm
(15.00 in) (16.57 in)
14 mm 14 mm
(0.55 in) (0.55 in)
nections for deformities; replace with new ones as
required.
(1) Front
A − B = Positive: Toe-in, Negative: Toe-out
α = Each toe angle
TURBO
Australia Australia
−0°15'
3°10'
14°30'
378 mm
(14.88 in)
20 mm
(0.79 in)
−0°45'
431 mm 361 mm
(16.97 in) (14.21 in)
17 mm
(0.67 in)
B
( 1 )
A
FS-00001