Subaru Legacy 2003 Service Manual page 2208

7) Install the driven plates, drive plates, pressure
plate and snap ring.
( A )
(A) Snap ring
8) Apply compressed air to see if the assembled
parts move smoothly.
9) Check clearance between snap ring and pres-
sure plate. <Ref. to AT-94, INSPECTION, Transfer
Clutch.>
10) Press-fit a new ball bearing with ST.
ST 899580100 INSTALLER
(A) Ball bearing
11) Coat a new seal ring with vaseline, and install it
in the seal ring groove of the shaft.
TRANSFER CLUTCH
AT-00138
AT-00139
ST
( A )
AT-00140
AT-93
NOTE:
Do not expand the seal ring excessively when in-
stalling.
(A) Snap ring
(B) Transfer clutch
12) Install the transfer clutch assembly without
damaging seal ring.
( A )
( B )
(A) Transfer clutch
(B) Extension case
AUTOMATIC TRANSMISSION
( B )
( A )
AT-00141
AT-00125