Subaru Legacy 2003 Service Manual page 2268

C: DISASSEMBLY
1. ONE-WAY CLUTCH INNER RACE
1) Remove seal rings.
( B )
(A) One way clutch inner race
(B) Seal rings
2) Using ST, remove needle bearing.
ST 398527700 PULLER ASSY
2. ONE-WAY CLUTCH OUTER RACE
1) Remove the one-way clutch after taking out the
snap ring.
( A )
( B )
(A) Snap ring
(B) Plate
(C) One-way clutch
2) Remove the needle bearing after taking out the
snap ring.
( A )
(A) Needle bearing
(B) Snap ring
ONE-WAY CLUTCH
( A )
AT-00298
( C )
AT-00267
( B )
AT-00268
AT-153
D: ASSEMBLY
1. ONE-WAY CLUTCH INNER RACE
1) Using a press and ST, install the needle bearing
to the inner race.
ST 398497701 ADAPTER
2) Apply vaseline to the groove of the inner race
and to the seal ring.
3) Install two seal rings to one-way clutch inner
race.
( B )
(A) One way clutch inner race
(B) Seal rings
2. ONE-WAY CLUTCH OUTER RACE
1) Install the needle bearing, and secure with the
snap ring.
( A )
(A) Needle bearing
(B) Snap ring
2) Install the one-way clutch, one-way clutch inner
race and plate, and secure with the snap ring.
AUTOMATIC TRANSMISSION
ST
AT-00299
( A )
AT-00298
( B )
AT-00268