11.Transfer Driven Gear
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to MT-32, REMOVAL, Manual
Transmission Assembly.>
2) Remove back-up light switch and neutral posi-
tion switch. <Ref. to MT-42, REMOVAL, Switches
and Harness.>
3) Remove transfer case with extension case as-
sembly. <Ref. to MT-47, REMOVAL, Transfer
Case and Extension Case Assembly.>
4) Remove extension case assembly.
5) Remove transfer driven gear.
6) Remove bearing outer race from extension case
and transfer case.
(A) Bearing outer race (transfer case)
(B) Bearing outer race (extension case)
TRANSFER DRIVEN GEAR
MT-00118
( A )
( B )
MT-00140
MANUAL TRANSMISSION AND DIFFERENTIAL
B: INSTALLATION
1) Install bearing outer race to extension case and
transfer case.
(A) Bearing outer race
(B) Bearing outer race
(C) Transfer case
(D) Extension case
2) Install transfer driven gear.
3) Install transfer case and extension case assem-
bly. <Ref. to MT-47, INSTALLATION, Transfer
Case and Extension Case Assembly.>
4) Install back-up light switch and neutral position
switch. <Ref. to MT-43, INSTALLATION, Switches
and Harness.>
5) Install the manual transmission assembly to ve-
hicle. <Ref. to MT-35, INSTALLATION, Manual
Transmission Assembly.>
MT-53
(C)
(A)
(B)
(D)
MT-00141
MT-00118