Subaru Legacy 2003 Service Manual page 2258

15) Install the rear sun gear in proper direction.
( A )
(A) Rear sun gear
(B) Rear planetary carrier
16) Install the thrust needle bearing in proper direc-
tion.
( A )
( B )
(A) Thrust needle bearing
(B) Front planetary carrier
(C) Rear sun gear side
(D) Front planetary carrier side
17) Install front planetary carrier to low clutch drum.
( A )
(A) Front planetary carrier
(B) Low clutch drum
PLANETARY GEAR AND LOW CLUTCH
( B )
AT-00261
( C )
( D )
AT-00280
( B )
AT-00260
18) Install snap ring to low clutch drum.
( A )
(A) Snap ring
(B) Front planetary carrier
19) Install the needle bearing, and secure with the
snap ring.
( A )
(A) Needle bearing
(B) Snap ring
20) Install the one-way clutch, one-way clutch inner
race and plate, and secure with the snap ring.
21) Set the inner race. Make sure that the forward
clutch is free in the clockwise direction and locked
in the counterclockwise direction, as viewed from
the front of the vehicle.
( A )
(A) Locked
(B) Free
AT-143
AUTOMATIC TRANSMISSION
( B )
AT-00281
( B )
AT-00268
( B )
AT-00282