Subaru Legacy 2003 Service Manual page 2579

CLUTCH SYSTEM
• Turbo model
NOTE:
• Install the clutch hose facing mark upward.
• Do not twist clutch hose while installing.
( C )
(A) Mark
(B) Clutch hose
(C) Operating cylinder
2) After bleeding air from operating cylinder, en-
sure that clutch operates properly.
<Ref. to CL-31, Clutch Fluid Air Bleeding.>
C: INSPECTION
1) Check operating cylinder for damage. If operat-
ing cylinder is damaged, replace it.
2) Check operating cylinder for fluid leakage or
damage on boot. If any leakage or damage is
found, replace operating cylinder.
OPERATING CYLINDER
T1
T2
CL-00040
( A )
( B )
CL-00041
CL-26