Subaru Legacy 2003 Service Manual page 1900

DIAGNOSTICS FOR ENGINE STARTING FAILURE
Step
1 CHECK OPERATING SOUND OF FUEL
PUMP.
Make sure that the fuel pump is in operation for
2 seconds when turning ignition switch to ON.
Does the fuel pump produce operating sound?
NOTE:
Fuel pump operation can also be executed us-
ing the Subaru Select Monitor (Function mode:
FD01).
For the procedure, refer to "Compulsory Valve
Operation Check Mode". <Ref. to
EN(H4DOSTC)-36, Compulsory Valve Opera-
tion Check Mode.>
2 CHECK POOR CONTACT.
Check poor contact in ECM connector.
Are there poor contact in ECM connectors?
Value
Operating sound produced.
There is poor contact.
EN(H4DOSTC)-61
ENGINE (DIAGNOSTICS)
Yes
Go to step 2. Record the DTC.
Repair the trouble
case. <Ref. to
EN(H4DOSTC)-
66, Diagnostic
Procedure with
Diagnostic Trou-
ble Code (DTC).>
Repair poor con- Inspection using
tact in ECM con- "General Diagnos-
nectors. tic Table" <Ref. to
EN(H4DOSTC)-
246, INSPEC-
TION, General
Diagnostic Table.>
No