Subaru Legacy 2003 Service Manual page 2183

SHIFT SOLENOIDS, DUTY SOLENOIDS AND ATF TEMPERATURE SENSOR
AUTOMATIC TRANSMISSION
B: INSTALLATION
1. SHIFT SOLENOIDS AND DUTY SOLE-
NOIDS
1) Insert solenoid and duty solenoid to specified
position.
( A )
(A) Lock-up duty solenoid (Blue)
(B) Low clutch timing solenoid (Gray)
(C) Line pressure duty solenoid (Red)
(D) Shift solenoid 2 (Yellow)
(E) Shift solenoid 1 (Green)
(F) 2-4 brake timing solenoid (Black)
(G) 2-4 brake duty solenoid (Red)
(H) SPORT shift solenoid (Beige) (if equipped)
2) Tighten the bolts and nuts.
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
E
A
Bolt length mm (in)
(A) 12 (0.47)
(B) 40 (1.57)
(C) 45 (1.77)
(D) 62 (2.44)
(E) 73 (2.87)
( C )
( D )
( E )
( B )
( H )
( G )
( F )
AT-00903
E
E
D
D
D
D
C
B
C
B
AT-00905
3) Connect the harness connectors.
Connect the connectors of same color, and secure
the connectors to valve body using clips.
( C )
( A )
( G )
(A) Lock-up duty solenoid (Blue)
(B) Low clutch timing solenoid (Gray)
(C) Line pressure duty solenoid (Red)
(D) Shift solenoid 2 (Yellow)
(E) Shift solenoid 1 (Green)
(F) 2-4 brake timing solenoid (Black)
(G) 2-4 brake duty solenoid (Red)
(H) SPORT shift solenoid (Beige) (if equipped)
4) Apply proper amount of liquid gasket to the en-
tire oil pan mating surface.
Fluid packing:
THREE BOND 1217B (Part No.
K0877YA020)
AT-68
( B )
( D )
( E )
( J )
( I )
( H )
( F )
AT-00902
AT-00051