13.2
Input/Output Pins
Table 13.1 summarizes the input/output pins used by the I
for each channel can be selected from the three pins*. The serial data I/O pin for each channel can
be selected form the three pins*. Do not set multiple pins as the serial clock I/O pin or serial data
I/O pin for a single channel.
Note: *
The program development tool (emulator) does not support this function.
Table 13.1 Pin Configuration
Channel
Symbol*
0
SCL0
SDA0
1
SCL1
SDA1
ExSCLA*
ExSDAA*
ExSCLB*
ExSDAB*
Notes: 1. In the text, the channel subscript is omitted, and only SCL and SDA are used.
2. The program development tool (emulator) does not support this function.
Rev. 1.00, 05/04, page 280 of 544
1
Input/Output
Input/Output
Input/Output
Input/Output
Input/Output
2
Input/Output
2
Input/Output
2
Input/Output
2
Input/Output
2
C bus interface. The serial clock I/O pin
Function
Serial clock input/output pin of IIC_0
Serial data input/output pin of IIC_0
Serial clock input/output pin of IIC_1
Serial data input/output pin of IIC_1
Serial clock input/output pin of IIC_0 or IIC_1
Serial data input/output pin of IIC_0 or IIC_1
Serial clock input/output pin of IIC_0 or IIC_1
Serial data input/output pin of IIC_0 or IIC_1