Renesas H8S/2111B Hardware Manual page 426

Bit Bit Name
4 IRQ6E3
3 IRQ11E2
Rev. 1.00, 05/04, page 392 of 544
R/W
Initial
Value Slave Host
0 R/W —
0 R/W —
Description
Host IRQ6 Interrupt Enable 3
Enables or disables a host IRQ6 interrupt request when
OBF3A is set by an ODR3 write.
0: Host IRQ6 interrupt request by OBF3A and IRQ6E3
is disabled
[Clearing conditions]
•
Writing 0 to IRQ6E3
•
LPC hardware reset, LPC software reset
•
Clearing OBF3A to 0 (when IEDIR = 0)
1: [When IEDIR = 0]
Host IRQ6 interrupt request by setting OBF3A to 1
is enabled
[When IEDIR = 1]
Host IRQ6 interrupt is requested.
[Setting condition]
•
Writing 1 after reading IRQ6E3 = 0
Host IRQ11 Interrupt Enable 2
Enables or disables a host IRQ11 interrupt request
when OBF2 is set by an ODR2 write.
0: Host IRQ11 interrupt request by OBF2 and IRQ11E2
is disabled
[Clearing conditions]
•
Writing 0 to IRQ11E2
•
LPC hardware reset, LPC software reset
•
Clearing OBF2 to 0 (when IEDIR = 0)
1: [When IEDIR = 0]
Host IRQ11 interrupt request by setting OBF2 to 1 is
enabled
[When IEDIR = 1]
Host IRQ11 interrupt is requested.
[Setting condition]
•
Writing 1 after reading IRQ11E2 = 0