Pwm Data Registers 7 To 0 (Pwdr7 To Pwd0); Pwm Data Polarity Register A (Pwdpra) - Renesas H8S/2111B Hardware Manual

8.3.2

PWM Data Registers 7 to 0 (PWDR7 to PWD0)

PWDR are 8-bit readable/writable registers. The PWM has eight PWM data registers. Each
PWDR specifies the duty cycle of the basic pulse to be output, and the number of additional
pulses. The value set in PWDR corresponds to a 0 or 1 ratio in the conversion period. The upper
four bits specify the duty cycle of the basic pulse as 0/16 to 15/16 with a resolution of 1/16. The
lower four bits specify how many extra pulses are to be added within the conversion period
comprising 16 basic pulses. Thus, a specification of 0/256 to 255/256 is possible for 0/1 ratios
within the conversion period. For 256/256 (100%) output, port output should be used.
8.3.3

PWM Data Polarity Register A (PWDPRA)

PWDPRA selects the PWM output phase.
Bit
Bit Name
7 OS7
6 OS6
5 OS5
4 OS4
3 OS3
2 OS2
1 OS1
0 OS0
Initial
Value R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
Description
Output Select 7 to 0
These bits select the PWM output phase. Bits OS7 to
OS0 correspond to outputs PW7 to PW0.
0: PWM direct output (PWDR value corresponds to high
width of output)
1: PWM inverted output (PWDR value corresponds to
low width of output)
Rev. 1.00, 05/04, page 151 of 544