Operation; Pulse Output; Figure 10.4 Pulse Output Example - Renesas H8S/2111B Hardware Manual

10.4

Operation

10.4.1

Pulse Output

Figure 10.4 shows an example for outputting an arbitrary duty pulse.
1. Clear the CCLR1 bit in TCR to 0 so that TCNT is cleared according to the compare match of
TCORA, and then set the CCLR0 bit to 1.
2. Set the OS3 to OS0 bits in TCSR to B'0110 so that 1 is output according to the compare match
of TCORA and 0 is output according to the compare match of TCORB.
According to the above settings, the waveforms with the TCORA cycle and TCORB pulse width
can be output without the intervention of software.
H'FF
TCORA
TCORB
H'00
TMO
Rev. 1.00, 05/04, page 206 of 544
TCNT

Figure 10.4 Pulse Output Example

Counter clear