Renesas H8S/2111B Hardware Manual page 149

• P66/FTOB/KIN6/IRQ6
The pin function is switched as shown below according to the combination of the OEB bit in
TOCR of the FRT and the P66DDR bit.
OEB
P66DDR
Pin Function
This pin is used as the IRQ6 input pin when bit IRQ6E is set to 1 in IER while the
Note:
*
KMIMR6 bit in KMIMR is 0. It can always be used as the KIN6 input pin.
• P65/FTID/KIN5
P65DDR
Pin Function
This pin can always be used as the FTID or KIN5 input pin.
Note: *
• P64/FTIC/KIN4
The pin function is switched as shown below according to the state of the P64DDR bit.
P64DDR
Pin Function
This pin can always be used as the FTIC or KIN4 input pin.
Note: *
• P63/FTIB/KIN3
P63DDR
Pin Function
This pin can always be used as the FTIB or KIN3 input pin.
Note: *
• P62/FTIA/KIN2/TMIY
P62DDR
Pin Function
This pin can always be used as the FTIA or KIN2 input pin. When the IOSY bit in
Note: *
TCRXY of TMR_Y is set to 0, this pin can be used as the TMIY input pin.
0
0
P66 input pin P66 output pin
0
P65 input pin
0
P64 input pin
0
P63 input pin
0
P62 input pin
FTIA input pin, TMIY input pin, KIN2 input pin*
1
IRQ6 input pin, KIN6 input pin*
FTID input pin, KIN5 input pin*
FTIC input pin, KIN4 input pin*
FTIB input pin, KIN3 input pin*
1
—
FTOB output pin
1
P65 output pin
1
P64 output pin
1
P63 output pin
1
P62 output pin
Rev. 1.00, 05/04, page 115 of 544