Table of Contents
Advertisement
• P43/TMCI1
The pin function is switched as shown below according to the state of the P43DDR bit.
P43DDR
Pin Function
Note:
*
When the external clock is selected by the bits CKS2 to CKS0 in TCR1 of TMR_1, this
pin is used as the TMCI1 input pin.
• P42/TMRI0/SDA1
The pin function is switched as shown below according to the combination of the ICE bit in
ICCR of IIC_1, the IIC1AS and the IIC1BS bits in PGCTL*
P42ICE = ICE
•
(IIC1AS+IIC1BS)*
2
P42ICE*
P42DDR
Pin Function
Note:
1. SDA1 is an NMOS-only output, and has direct bus drive capability.
When bits CCLR1 and CCLR0 in TCR0 of TMR_0 are set to 1, this pin is used as the
TMRI0 input pin. When the P42 output pin is set, the output type is NMOS push-pull
output.
2. The program development tool (emulator) does not support the function of PGCTL.
Thus P42ICE is treated as ICE.
• P41/TMO0
The pin function is switched as shown below according to the combination of the OS3 to OS0
bits in TCSR of TMR_0 and the P41DDR bit.
OS3 to OS0
P41DDR
Pin Function
• P40/TMCI0
The pin function is switched as shown below according to the state of the P40DDR bit.
P40DDR
Pin Function
Note:
*
When an external clock is selected with bits CKS2 to CKS0 in TCR0 of TMR_0, this pin
is used as the TMCI0 input pin.
0
P43 input pin
2
0
0
P42 input pin
All 0
0
P41 input pin
0
P40 input pin
TMCI1 input pin*
2
, and the P42DDR bit.
1
P42 output pin
1
TMRI0 input pin*
1
P41 output pin
TMCI0 input pin*
Rev. 1.00, 05/04, page 109 of 544
1
P43 output pin
1
—
SDA1 I/O pin
Not all 0
—
TMO0 output pin
1
P40 output pin
Advertisement
Table of Contents
