Table 2.3 Data Transfer Instructions - Renesas H8S/2111B Hardware Manual

Table 2.3 Data Transfer Instructions
Instruction Size*
MOV B/W/L
MOVFPE B
MOVTPE B
POP W/L
PUSH W/L
2
LDM* L
2
STM* L
Notes: 1. Size refers to the operand size.
B: Byte
W: Word
L: Longword
2. ER7 is not used as the register that can be saved (STM)/restored (LDM) when using
STM/LDM instruction, because ER7 is the stack pointer.
1
Function
(EAs) → Rd, Rs → (EAd)
Moves data between two general registers or between a general
register and memory, or moves immediate data to a general register.
Cannot be used in this LSI.
Cannot be used in this LSI.
@SP+ → Rn
Pops a general register from the stack. POP.W Rn is identical to
MOV.W @SP+, Rn. POP.L ERn is identical to MOV.L @SP+, ERn
Rn → @-SP
Pushes a general register onto the stack. PUSH.W Rn is identical to
MOV.W Rn, @-SP. PUSH.L ERn is identical to MOV.L ERn, @-SP.
@SP+ → Rn (register list)
Pops two or more general registers from the stack.
Rn (register list) → @-SP
Pushes two or more general registers onto the stack.
Rev. 1.00, 05/04, page 31 of 544