Siemens SINAMICS G120 List Manual page 621

From monitoring functions
From monitoring functions
From monitoring functions
From monitoring functions
From speed signals
From speed signals
From torque messages, motor locked/stalled
From torque messages, motor locked/stalled
From monitoring functions
From monitoring functions
From torque messages, motor locked/stalled
From load monitoring
From load monitoring
From monitoring functions
1 2
Internal control/status words
Status word, monitoring functions 2 (r2198)
Bit No. Status word, monitoring functions 2 (r2198)
1 = |n_act| ” speed threshold 5
[8023.8] 0
1 = |n_act| > speed threshold 5
[8023.8] 1
1 = |n_act| ” speed threshold 6
[8023.8] 2
3 1 = |n_act| > speed threshold 6
[8023.8]
[8011.8] 4 1 = |n_set| < p2161
[8011.8] 5 1 = n_set > 0
1 = Motor blocked
[8012.8] 6
1 = Motor stalled
[8012.8] 7
8 1 = |I_act| < I_threshold p2170
[8022.8]
[8023.8] 9 1 = |M_act| > torque threshold 1 and n_set reached
[8012.3] 10 1 = |M_set| < torque threshold 1 (p2174)
1 = Load monitoring signals an alarm
[8013.8] 11
1 = Load monitoring signals a fault
[8013.8] 12
1 = |M_act| > torque threshold 1
[8023.8] 13
14 Reserved
15 Reserved
3 4
r2198.0
r2198.1
r2198.2
r2198.3
r2198.4
r2198.5
r2198.6
r2198.7
r2198.8
r2198.9
r2198.10
r2198.11
r2198.12
r2198.13
5 6
Function diagram
fp_2536_97_63.vsd
G120 CU240B/E-2
09.12.2015 V4.7.6
ZSW monitor 2
r2198
r2198
[2530.2]
7 8
- 2536 -