Siemens SINAMICS G120 List Manual page 299

p2104[0...n] BI: 2nd acknowledge faults / 2nd acknowledge
CU240B-2 Access level: 3
CU240E-2
Can be changed: U, T
CU240E-2_F
Unit group: -
Min
-
Description: Sets the second signal source to acknowledge faults.
Note: A fault acknowledgment is triggered with a 0/1 signal.
p2105[0...n] BI: 3rd acknowledge faults / 3rd acknowledge
Access level: 3
Can be changed: U, T
Unit group: -
Min
-
Description: Sets the third signal source to acknowledge faults.
Note: A fault acknowledgment is triggered with a 0/1 signal.
p2106[0...n] BI: External fault 1 / External fault 1
Access level: 3
Can be changed: U, T
Unit group: -
Min
-
Description: Sets the signal source for external fault 1.
Dependency: Refer to: F07860
Note: An external fault is triggered with a 1/0 signal.
p2107[0...n] BI: External fault 2 / External fault 2
Access level: 3
Can be changed: U, T
Unit group: -
Min
-
Description: Sets the signal source for external fault 2.
Dependency: Refer to: F07861
Note: An external fault is triggered with a 1/0 signal.
p2108[0...n] BI: External fault 3 / External fault 3
Access level: 3
Can be changed: U, T
Unit group: -
Min
-
Description: Sets the signal source for external fault 3.
External fault 3 is initiated by the following AND logic operation:
- BI: p2108 negated
- BI: p3111
- BI: p3112 negated
Dependency: Refer to: p3110, p3111, p3112
Refer to: F07862
Note: An external fault is triggered with a 1/0 signal.
SINAMICS G120 Control Units CU240B-2/CU240E-2
List Manual (LH11), 01/2016, A5E33839529
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
2 Parameters
2.2 List of parameters
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546, 8060
Factory setting
0
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546, 8060
Factory setting
0
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546
Factory setting
1
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546
Factory setting
1
Data type: U32 / Binary
Dyn. index: CDS, p0170
Func. diagram: 2546
Factory setting
1
299