Siemens SINAMICS G120 List Manual page 282

2 Parameters
2.2 List of parameters
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
[8] = PZD 9
[9] = PZD 10
[10] = PZD 11
[11] = PZD 12
Notice: Where there is a multiple interconnection of a connector output, all the connector inputs must either have Integer or
FloatingPoint data types. A BICO interconnection for a single PZD can only take place either on r2050 or r2060.
p2051[0...16] CI: PROFIdrive PZD send word / PZD send word
CU240B-2_DP Access level: 3
CU240E-2_DP
Can be changed: U, T
CU240E-2 PN
Unit group: -
CU240E-2_PN_F
Min
CU240E-2_DP_F
-
Description: Selects the PZD (actual values) with word format to be sent to the fieldbus controller.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
[8] = PZD 9
[9] = PZD 10
[10] = PZD 11
[11] = PZD 12
[12] = PZD 13
[13] = PZD 14
[14] = PZD 15
[15] = PZD 16
[16] = PZD 17
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
p2051[0...16] CI: PROFIdrive PZD send word / PZD send word
CU240B-2 Access level: 3
CU240E-2
Can be changed: U, T
CU240E-2_F
Unit group: -
Min
-
Description: Selects the PZD (actual values) with word format to be sent to the fieldbus controller.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
[8] = PZD 9
[9] = PZD 10
[10] = PZD 11
[11] = PZD 12
282
Calculated: -
Scaling: 4000H
Unit selection: -
Max
-
Calculated: -
Scaling: 4000H
Unit selection: -
Max
-
SINAMICS G120 Control Units CU240B-2/CU240E-2
Data type: U32 / Integer16
Dyn. index: -
Func. diagram: 2450, 2470, 9370
Factory setting
[0] 2089[0]
[1] 63[0]
[2...16] 0
Data type: U32 / Integer16
Dyn. index: -
Func. diagram: 2450, 2470, 9370
Factory setting
0
List Manual (LH11), 01/2016, A5E33839529