Siemens SINAMICS G120 List Manual page 52

2 Parameters
2.2 List of parameters
r0198[0...2] BIOS/EEPROM data version / BIOS/EEPROM vers
Access level: 4
Can be changed: -
Unit group: -
Min
-
Description: Displays the BIOS and EEPROM data version.
r0198[0]: BIOS version
r0198[1]: EEPROM data version EEPROM 0
r0198[2]: EEPROM data version EEPROM 1
Dependency: Refer to: r0018, r0197
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
r0200[0...n] Power unit code number actual / PU code no. act
Access level: 3
Can be changed: -
Unit group: -
Min
-
Description: Displays the unique code number of the power unit.
Note: r0200 = 0: No power unit data found
p0201[0...n] Power unit code number / PU code no
Access level: 3
Can be changed: C(2)
Unit group: -
Min
0
Description: Sets the actual code number from r0200 to acknowledge the power unit being used.
When commissioned for the first time, the code number is automatically transferred from r0200 into p0201.
Note: The parameter is used to identify when the drive is being commissioned for the first time.
The power unit commissioning can only be exited (p0201 = r0200), if the actual and acknowledged code numbers are
identical (p0010 = 2).
When the code number is changed, the connection voltage (p0210) is checked and, if necessary, adjusted.
r0203[0...n] Actual power unit type / PU actual type
Access level: 3
Can be changed: -
Unit group: -
Min
2
Description: Displays the type of power unit found.
Value: 2:
3:
4:
5:
6:
7:
100:
101:
102:
103:
112:
52
MICROMASTER 440
MICROMASTER 411
MICROMASTER 410
MICROMASTER 436
MICROMASTER 440 PX
MICROMASTER 430
SINAMICS S
SINAMICS S (value)
SINAMICS S (combi)
SINAMICS S120M (distributed)
PM220 (SINAMICS G120)
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
65535
Calculated: -
Scaling: -
Unit selection: -
Max
400
SINAMICS G120 Control Units CU240B-2/CU240E-2
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned16
Dyn. index: PDS
Func. diagram: -
Factory setting
-
Data type: Unsigned16
Dyn. index: PDS
Func. diagram: -
Factory setting
0
Data type: Integer16
Dyn. index: PDS
Func. diagram: -
Factory setting
-
List Manual (LH11), 01/2016, A5E33839529