Siemens SINAMICS G120 List Manual page 266

2 Parameters
2.2 List of parameters
r1919[0...2] Identified stator inductance 4 / L_stator 4 ident
Access level: 4
Can be changed: -
Unit group: -
Min
- [mH]
Description: Displays the stator inductance identified for the 4th point of the saturation characteristic.
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
r1925[0...2] Identified threshold voltage / U_threshold ident
Access level: 4
Can be changed: -
Unit group: -
Min
- [Vrms]
Description: Displays the identified IGBT threshold voltage.
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
r1926[0...2] Identified effective valve lockout time / t_lock_valve id
Access level: 4
Can be changed: -
Unit group: -
Min
- [µs]
Description: Displays the identified effective valve lockout time.
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
r1927[0...2] Identified rotor resistance / R_rotor ident
Access level: 4
Can be changed: -
Unit group: -
Min
- [ohm]
Description: Displays identified rotor resistance (on separately excited synchronous motors: damping resistance).
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
p1959[0...n] Rotating measurement configuration / Rot meas config
PM230 Access level: 3
PM230_STO
Can be changed: T
PM240
Unit group: -
Min
-
Description: Sets the configuration of the rotating measurement.
For bit 12 = 1:
The selection only has an effect on the measurement p1960 = 1, 2. For the shortened measurement, the magnetizing
current and moment of inertia are determined with a somewhat lower accuracy.
266
Calculated: -
Scaling: -
Unit selection: -
Max
- [mH]
Calculated: -
Scaling: -
Unit selection: -
Max
- [Vrms]
Calculated: -
Scaling: -
Unit selection: -
Max
- [µs]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: p0340 = 1
Scaling: -
Unit selection: -
Max
-
SINAMICS G120 Control Units CU240B-2/CU240E-2
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [mH]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [Vrms]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [µs]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [ohm]
Data type: Unsigned16
Dyn. index: DDS, p0180
Func. diagram: -
Factory setting
0000 0000 0001 1110 bin
List Manual (LH11), 01/2016, A5E33839529