Siemens SINAMICS G120 List Manual page 495

r20199 BO: DFR 0 output Q / DFR 0 output Q
Access level: 3
Can be changed: -
Unit group: -
Min
-
Description: Display parameter for output Q of instance DFR 0 of the D flipflop.
r20200 BO: DFR 0 inverted output QN / DFR 0 inv outp QN
Access level: 3
Can be changed: -
Unit group: -
Min
-
Description: Display parameter for the inverted output QN of instance DFR 0 of the D flipflop.
p20201 DFR 0 run-time group / DFR 0 RTG
Access level: 3
Can be changed: T
Unit group: -
Min
1
Description: Setting parameter for the run-time group in which instance DFR 0 of the D flipflop is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
p20202 DFR 0 run sequence / DFR 0 RunSeq
Access level: 3
Can be changed: T
Unit group: -
Min
0
Description: Setting parameter for the run sequence of instance DFR 0 within the run-time group set in p20201.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20203[0...3] BI: DFR 1 inputs / DFR 1 inputs
Access level: 3
Can be changed: T
Unit group: -
Min
-
Description: Sets the signal source for trigger input I, D input D, set input S, and reset input R of instance DFR 1 of the D flipflop.
Index: [0] = Trigger input I
[1] = D input D
[2] = Set S
[3] = Reset R
SINAMICS G120 Control Units CU240B-2/CU240E-2
List Manual (LH11), 01/2016, A5E33839529
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: -
Unit selection: -
Max
-
2 Parameters
2.2 List of parameters
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7240
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7240
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7240
Factory setting
9999
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7240
Factory setting
550
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7240
Factory setting
0
495