Siemens SINAMICS G120 List Manual page 460

2 Parameters
2.2 List of parameters
The F-DIs that are being used by the Safety Integrated functions are displayed.
If the module used has fewer than 3 F-DIs, "Freely available" is displayed for the F-DIs which are not in use.
Bit field: Bit
00
01
02
Dependency: p10006 / p10106
p10022 / p10122
p10023 / p10123
p10026 / p10126
p10030 / p10130
p10031 / p10131
p10050 / p10150
Refer to: r10049
p10150 SI Motion PROFIsafe F-DI transfer (processor 2) / SI Ps F-DI tran P2
PM240 Access level: 3
PM250
Can be changed: C(95)
PM260
Unit group: -
CU240E-2_PN_F
Min
CU240E-2_DP_F
-
Description: Setting for the transfer and evaluation of failsafe digital inputs (F-DI) via PROFIsafe.
The safe state of the selected F-DIs is transferred to the F-control via PROFIsafe. The F-DIs are monitored for
discrepancies. Discrepancy faults can be acknowledged via PROFIsafe.
Bit field: Bit
00
01
02
Dependency: Refer to: p10050
Note: F-DI: Failsafe Digital Input
r10151.0...2 CO/BO: SI Motion digital inputs status (processor 2) / SI DI status P2
PM240 Access level: 3
PM250
Can be changed: -
PM260
Unit group: -
CU240E-2_F
Min
CU240E-2_PN_F
-
CU240E-2_DP_F
Description: Display and BICO output for the single-channel, logical and debounced status of the fail-safe digital inputs (F-DI).
The parameter is updated in the SI Motion monitoring clock cycle.
Bit field: Bit
00
01
02
Dependency: Refer to: p9501, p9601, p10117, p10150
Note: F-DI: Failsafe Digital Input
If a safety function is assigned to an input (e.g. via p10122), then the following applies:
- logical "0": Safety function is selected
- logical "1": Safety function is de-selected
460
Signal name
F-DI 0
F-DI 1
F-DI 2
Signal name
F-DI 0 processor 2
F-DI 1 processor 2
F-DI 2 processor 2
Signal name
F-DI 0 processor 2
F-DI 1 processor 2
F-DI 2 processor 2
1 signal
Safety monitored
Safety monitored
Safety monitored
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Transfer
Transfer
Transfer
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
High
High
High
SINAMICS G120 Control Units CU240B-2/CU240E-2
0 signal
Freely available
Freely available
Freely available
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
0000 bin
0 signal
No transfer
No transfer
No transfer
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
-
0 signal
Low
Low
Low
List Manual (LH11), 01/2016, A5E33839529
FP
-
-
-
FP
-
-
-
FP
-
-
-