Siemens SINAMICS G120 List Manual page 608

3 Function diagrams
3.7 Internal control/status words
3.7 Internal control/status words
Function diagrams
2501 – Control word sequence control (r0898)
2503 – Status word sequence control (r0899)
2505 – Control word, setpoint channel (r1198)
2510 – Status word 1 (r0052)
2511 – Status word 2 (r0053)
2512 – Control word 1 (r0054)
2513 – Supplementary control word (r0055)
2520 – Control word, speed controller (r1406)
2522 – Status word, speed controller (r1407)
2526 – Status word, closed-loop control (r0056)
2530 – Status word, current control (r1408)
2534 – Status word monitoring functions 1 (r2197)
2536 – Status word monitoring functions 2 (r2198)
2537 – Status word monitoring functions 3 (r2199)
2546 – Control word, faults/alarms (r2138)
2548 – Status word, faults/alarms 1 and 2 (r2139 and r2135)
2610 – Sequence control - sequencer
2634 – Sequence control - missing enable signals, line contactor control
608
SINAMICS G120 Control Units CU240B-2/CU240E-2
List Manual (LH11), 01/2016, A5E33839529
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626