System Time; System Time Setting; Show Time; Commands In The Global Configuration Mode - Siemens SCALANCE S615 Configuration Manual

System time

This part contains the sections describing how the system time is obtained and the settings.
4.1

System time setting

This section describes commands relevant for the configuration of the system time.
4.1.1

show time

Description
This command shows the settings of the system clock.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show time
Result
The settings for the system clock are displayed.
4.1.2

Commands in the global configuration mode

This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
Privileged EXEC mode again.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
or
cli#
command to change to this mode.
configure terminal
or
end exit
command and are then in the
4
123