No Auto-Fwrules - Siemens SCALANCE S615 Configuration Manual

Requirement
You are in the IPSEC PHASE configuration mode.
The command prompt is as follows:
cli(config-conn-phs2)#
Syntax
Call the command without parameter assignment:
auto-fwrules
Result
The firewall rule is created automatically for the VPN connection.
Further notes
You display this setting and other information with the
You disable the setting with the
9.3.8.2

no auto-fwrules

Description
With this command you specify that the firewall rule will not be created automatically for the
VPN connection.
Requirement
You are in the IPSEC PHASE configuration mode.
The command prompt is as follows:
cli(config-conn-phs2)#
Syntax
Call the command without parameter assignment:
no auto-fwrules
Result
The firewall rule is not created automatically for the VPN connection. You need to create the
firewall rule manually.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
show ipsec conn-phase2
command.
no auto-fwrules
Security and authentication
9.3 IPsec VPN
command.
397