Siemens SCALANCE S615 Configuration Manual page 83

Parameter
http
sntp
http
auto-logout
time
ntp
auto-save
events
firewall
firewallnat
sinemarc
proxyserver
srs
all
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 25)".
If you call up the command without parameters, only the active operational settings of all
modules and all interfaces that do not match the preset values are displayed.
Result
The selected configuration settings of the device are displayed.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Shows the configuration settings of the Hyper-
text Transfer Protocol.
Shows the configuration settings of the Simple
Network Time Protocol.
Shows the configuration settings of the Hyper-
text Transfer Protocol.
Shows the configuration settings of the auto
logout function.
Shows the configuration settings of the system
time.
Shows the configuration settings of the Network
Time Protocol.
Shows the configuration settings of the auto
save function.
Shows the configuration settings of the system
events.
Shows the configuration settings of the firewall.
Shows the configuration settings of the NAT.
Shows the configuration settings of the SINEMA
RC connection.
Shows the configuration settings of the proxy
servers.
Shows the configuration settings of SRS.
Shows all configuration settings.
Configuration
2.4 Configuration Save & Restore
Range of values
-
-
-
-
-
-
-
-
-
-
-
-
-
-
83