Show Seclog - Siemens SCALANCE S615 Configuration Manual

10.1.1.9

show seclog

Description
With this command, you show the messages that occurred during communication via a
secure VPN tunnel. The messages can be filtered according to the event severity.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show seclog [{ info | warning | critical }]
Parameter
The parameters have the following meaning:
Parameter
info
warning
critical
If you use the command without setting parameters, all messages are displayed.
Result
The content of the security log is displayed.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
or
cli#
Description
Information
Warnings
Critical messages
Diagnostics
10.1 Event and fault handling
Range of values / note
-
-
-
417