Commands In The Proxyserver Configuration Mode; Srv Name - Siemens SCALANCE S615 Configuration Manual

Requirement
You are now in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
proxyserver
Result
You are now in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
Further notes
You exit the PROXYSERVER configuration mode with the
6.9.3

Commands in the PROXYSERVER configuration mode

This section describes commands that you can call up in the PROXYSERVER configuration
mode.
In the Global configuration mode, enter the proxyserver command to change to this mode.
● If you exit the PROXYSERVER configuration mode with the
the Global configuration mode.
● If you exit the PROXYSERVER configuration mode with the
the Privileged EXEC mode.
6.9.3.1

srv name

Description
With this command, you create a proxy server entry. You assign a name and configure the
parameters.
Requirement
You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Network protocols
6.9 Proxy server
or command.
end exit
command, you return to
exit
command, you return to
end
257