Vir-Ip - Siemens SCALANCE S615 Configuration Manual

Requirement
● The VPN connection is established when necessary (on demand).
● You are in the IPSEC CONNECTION configuration mode.
The command prompt is as follows:
cli(onfig-conn-X)#
Syntax
Call up the command with the following parameters:
timeout <sec(0-1000)>
The parameter has the following meaning:
Parameter
sec
Result
The period of time is configured
Further notes
You display this setting and other information with the
You configure the
9.3.5.8

vir-ip

Description
With this command, you specify that during connection establishment a virtual IPv4 address
is requested from the VPN remote station.
Requirement
You are in the IPSEC CONNECTION configuration mode.
The command prompt is as follows:
cli(onfig-conn-X)#
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Period
setting with the
on demand
Security and authentication
Range of values / note
Enter the period of time in sec-
onds.
show ipsec connections
command.
operation
9.3 IPsec VPN
command.
377