Table of Contents
Advertisement
1.5.1
Supported Fiber Optic Cables
The following fiber optic cable types are supported under the stated conditions.
Cable Type
Wavelength (nm) Modal Bandwidth
OM1 (62.5/125)
OM2 (50/125)
a
OM3 (50/125)
a
OM4 (50/125)
a
Laser optimized.
1.6
Precision Time Protocol (PTP) Support
The Precision Time Protocol (PTP) module adds the ability to provide time
synchronization via Ethernet using the Precision Time Protocol (PTP) and Network
Time Protocol (NTP), and to synchronize with an external IRIG-B source.
The PTP module features BNC ports for TTL IN and TTL OUT. It also includes an LED to
indicate when synchronization has been achieved.
Note
The PTP module can only be installed in slot 5. For more information, refer to
"Communication Ports (Page
1
2
Figure 1.2
For more information about the BNC ports, refer to
RUGGEDCOM RS416PF
Installation Manual, 04/2021, C79000-G8976-1355-04
(MHz·km)
850
200
1300
500
850
500
1300
500
850
1500
1300
500
850
3500
1300
500
1
2
TTL OUT Port
TTL IN Port
PTP Module
100Base-FX
—
2000
—
2000
—
2000
—
2000
25)".
1.5.1 Supported Fiber Optic Cables
Distance (m)
1000Base-SX
275
—
550
—
550
—
550
—
"BNC Ports (Page
31)".
Introduction
10GBase-SR
33
—
82
—
300
—
400
—
5
Advertisement
Table of Contents
