Functions specific to SCALANCE
3.5 SINEMA RC
3.5.4.10
no shutdown
Note
This command is only available with a KEY-PLUG.
Description
With this command, you establish a connection to the configured SINEMA RC Server.
Requirement
You are in the SINEMARC configuration mode.
The command prompt is as follows:
cli(config-sinemarc)#
Syntax
Call the command without parameter assignment:
no shutdown
Result
The connection is enabled.
Further notes
You disable the connection with the
You display this setting and other information with the
120
command.
shutdown
show sinemarc
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.