No Snmp User - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
Network protocols
6.6 SNMP
If optional parameters are not specified when configuring an SNMP user, the defaults values
apply.
Result
The details of the SNMP user are configured.
Further notes
You delete the settings with the
You display the configured users with the
6.6.2.21
no snmp user
Description
With this command, you delete the details of an SNMP user.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp user <UserName>
The parameter has the following meaning:
Parameter
UserName
Result
The details of the SNMP user are deleted.
Further notes
You change the settings with the
You display the configured users with the
248
command.
no snmp user
show snmp user
Description
Name of the user
command.
snmp user
show snmp user
command.
Range of values / note
max. 32 characters
command.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Hide quick links:
Advertisement
Table of Contents
