Smtp Client; Show Commands; Show Events Smtp-Server; Show Events Sender Email - Siemens SCALANCE S615 Configuration Manual

Network protocols

6.10 SMTP client

6.10 SMTP client
This section describes commands of the Simple Mail Transfer Protocol (SMTP).
6.10.1

show commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
6.10.1.1

show events smtp-server

Description
This command shows the configured SMTP servers.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events smtp-server
Result
The configured SMTP servers are displayed.
6.10.1.2

show events sender email

Description
This command shows the configured e-mail sender address.
266
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
Configuration Manual, 06/2015, C79000-G8976-C406-02
SCALANCE S615 Command Line Interface