Logon Addr - Siemens SCALANCE S615 Configuration Manual

3.4.3.3

logon addr

Note
This command is only available with a KEY-PLUG.
Description
With this command, you create a destination server entry.
Requirement
You are in the SRS configuration mode.
The command prompt is as follows:
cli(config-srs)#
Syntax
Call up the command with the following parameters:
logon addr <ip_addr|dns> group <descr(255)> name <name(255)> pw <password(100)> [{on
| off}]
The parameters have the following meaning:
Parameter
ip_addr
dns
group
descr
name
name
pw
password
on
off
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
IPv4 address
DNS host name
Keyword for the group name
Group name
Keyword for the user name
User name for access to the destina-
tion server
Keyword for the password
Password for access to the destination
server
Enables the transfer of the external IP
address. This transfer is made using
the secure HTTPS protocol.
Disables the transfer of the external IP
address.
Functions specific to SCALANCE
Range of values / note
Enter the IPv4 address of the
proxy server.
Enter the DNS host name of the
proxy server.
Maximum of 50 characters
-
Enter a group name.
-
Specify the negotiated user name.
Maximum of 255 characters
-
Enter the negotiated password.
Maximum of 100 characters
-
-
3.4 SRS
101