No Logon - Siemens SCALANCE S615 Configuration Manual

Functions specific to SCALANCE
3.4 SRS
Result
The destination server entry is created. During creation, an entry with a unique number
(index) is created.
Further notes
You display this setting and other information with the
You display the numbers of the destination servers with the
You change the settings with the
logon idx pw
You delete the destination server entry with the
3.4.3.4

no logon

Note
This command is only available with a KEY-PLUG.
Description
With this command, you delete a specific destination server or all destination servers.
Requirement
You are in the SRS configuration mode.
The command prompt is as follows:
cli(config-srs)#
Syntax
Call up the command with the following parameters:
no logon {idx<num(1-100)> | all}
The parameters have the following meaning:
Parameter
idx
num
all
102
logon idx addr
commands.
Description
Keyword for the number of the destina-
tion server
Number corresponding to a specific
destination server.
Deletes all destination servers
show srs overview
logon show-idx
, ,
logon idx group logon idx name
command.
no logon
Range of values / note
-
Enter the required number.
-
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.
command.
and