Name - Siemens SCALANCE S615 Configuration Manual

5.1.4.3

name

Description
With this command, you assign a name to the VLAN.
Requirement
You are in the VLAN Configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call up the command with the following parameters:
name <vlan-name>
The parameter has the following meaning:
Parameter
vlan-name
Result
The VLAN is assigned a name.
Further notes
You delete name assignment for a VLAN with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Name that will be assigned to the
VLAN
Range of values / note
max. 32 characters
command.
no name
Network structures
5.1 VLAN
165