Network protocols
6.5 DNS
You display this setting and other information with the
command.
6.5.3.5
no shutdown
Description
With this command, you start the DNS client of the device. To be able to use the function, a
DNS server must be reachable.
Requirement
You are in the DNS CLIENT configuration mode.
The command prompt is as follows:
cli(config-dnsclient)#
Syntax
Call the command without parameter assignment:
no shutdown
Result
The DNS client of the device is enabled and when necessary sends queries to the DNS
server.
Further notes
You end the DNS client with the
You display this setting and other information with the
command.
6.5.4
Commands in the DNS PROXY configuration mode
This section describes commands that you can call up in the DNS PROXY configuration
mode.
In the Global configuration mode, enter the
● If you exit the DNS PROXY configuration mode with the
Global configuration mode.
● If you exit the DNS PROXY configuration mode with the
Privileged EXEC mode.
214
show dnsclient information
command.
shutdown
show dnsclient information
command to change to this mode.
dnsproxy
Configuration Manual, 06/2015, C79000-G8976-C406-02
command, you return to the
exit
command, you return to the
end
SCALANCE S615 Command Line Interface