Syntax
Call up the command with the following parameters:
srv set name <string(255)> pw <name(255)>
The parameters have the following meaning:
Parameter
string
pw
Result
The password is changed.
Further notes
You display the available proxy server names with the
You create the proxy server with the
6.9.3.7
srv name type
Description
With this command, you change the type of the proxy server.
Requirement
● The proxy server name has been created.
● You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
Syntax
Call up the command with the following parameters:
srv name <string(128)> type <http|socks>
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Proxy server name
Password
srv name
Range of values / note
Specify the proxy server
name.
Maximum of 128 characters
Specify the changed pass-
word for access to the proxy
server.
Maximum of 255 characters
srv show-names
command.
Network protocols
6.9 Proxy server
command.
263