No Icmp - Siemens SCALANCE S615 Configuration Manual

The parameters have the following meaning:
Parameter
string
type
num
code
num
ver
ipv4
Result
The ICMP service is configured.
Further notes
You display the available service names with the
You show the available ICMP packet types and codes with the
command.
You delete this service with the
You display this setting and other information with the
command.
9.2.4.2

no icmp

Description
With this command, you delete all ICMP services or a specific ICMP service.
Requirement
● The corresponding ICMP service has been created and is not being used anywhere.
● You are in the Firewall configuration mode.
The command prompt is as follows:
cli(config-fw)#
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
ICMP service name
Keyword for the ICMP packet type
Number corresponding to a specific ICMP
packet type.
Keyword for the code of the ICMP packet type
Number corresponding to a specific code.
Keyword for the version of the ICMP protocol
IP Version4
command.
no icmp
Security and authentication
Range of values / note
Enter a unique ICMP service
name.
Maximum of 32 characters
-
Enter the required number.
Default: 256 = any
-
Enter the required number.
Default: 256
-
-
command.
icmp show-names
icmp show-types-codes
show firewall icmp-services ipv4
9.2 Firewall
315