Server Type - Siemens SCALANCE S615 Configuration Manual

Network protocols
6.5 DNS
Requirement
You are in the DNS CLIENT configuration mode.
The command prompt is as follows:
cli(config-dnsclient)#
Syntax
Call up the command with the following parameters:
no manual {srv <ip_addr>|all}
The parameters have the following meaning:
Parameter
srv
ip address
all
Result
The specified DNS server is deleted.
Further notes
You create a DNS server entry with the
You display this setting and other information with the
command.
6.5.3.3

server type

Description
With this command, you specify which DNS server the device uses.
Requirement
You are in the DNS CLIENT configuration mode.
The command prompt is as follows:
cli(config-dnsclient)#
Syntax
Call up the command with the following parameters:
server type {all | manual | learned}
212
Description
Keyword for DNS server
IPv4 address
Deletes all DNS servers
manual srv
Range of values / note
-
Enter the IPv4 address of the
DNS server.
-
command.
show dnsclient information
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02