Dnsproxy - Siemens SCALANCE S615 Configuration Manual

cli(config)#
Syntax
Call the command without parameter assignment:
dnsclient
Result
You are now in the DNS CLIENT configuration mode.
The command prompt is as follows:
cli(config-dnsclient)#
Further notes
You exit the DNS CLIENT configuration mode with the
6.5.2.3

dnsproxy

Description
With this command, you change to the DNS PROXY configuration mode.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
dnsproxy
Result
You are now in the DNS PROXY configuration mode.
The command prompt is as follows:
cli(config-dnsproxy)#
Further notes
You exit the DNS PROXY configuration mode with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Network protocols
or command.
end exit
or command.
end exit
6.5 DNS
209