Sntp Client; Show Commands; Show Sntp Broadcast-Mode Status - Siemens SCALANCE S615 Configuration Manual

4.3

SNTP client

4.3.1

show commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
This section describes commands relevant for configuration of the SNTP client.
4.3.2

show sntp broadcast-mode status

Description
This command shows the current configuration of the broadcast mode of SNTP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show sntp broadcast-mode status
Result
The current SNTP broadcast configuration is displayed.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
System time
4.3 SNTP client
131