Functions specific to SCALANCE
3.5 SINEMA RC
3.5.4.8
no proxy
Note
This command is only available with a KEY-PLUG.
Description
With this command, you remove the proxy server.
Requirement
You are in the SINEMARC configuration mode.
The command prompt is as follows:
cli(config-sinemarc)#
Syntax
Call the command without parameter assignment:
no proxy
Result
The proxy server is removed.
Further notes
You configure the proxy server with the
You display this setting and other information with the
118
command.
proxy
show sinemarc
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.