Commands In The Global Configuration Mode; User-Account - Siemens SCALANCE S615 Configuration Manual

9.1.4

Commands in the global configuration mode

This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
Privileged EXEC mode again.
9.1.4.1

user-account

Description
With this command, you specify a new user. You can also change the password / role of an
already created user.
● If the logged in user has the "admin" role, he or she can create a new user or change the
password / role of a user.
● When the logged in users have the "user" role, they can can only change their password.
Note
You can create up to 16 additional user accounts.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
user-account <string> password <passwd> privilege {user | admin}
The parameters have the following meaning:
Parameter
string
password
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
configure terminal
Description
User name
Keyword for a password
Security and authentication
9.1 User rights management
command to change to this mode.
or command and are then in the
end exit
Range of values / note
Enter a user name. The name must be
unique.
-
305